Sartorius QC7CCE-D - Interface Parameter Settings; Baud Rate; Parity; Number of Stop Bits

Interface Parameter Settings
Baud Rate Code Changes
150 baud 5 1 1
300 baud 5 1 2
600 baud 5 1 3
1,200 baud 5 1 4 *
2,400 baud 5 1 5
4,800 baud 5 1 6
9,600 baud 5 1 7
19,200 baud 5 1 8
Parity Code Changes
Mark 5 2 1
Space 5 2 2
Odd 5 2 3 *
Even 5 2 4
Number of Stop Bits Code Changes
1 stop bit 5 3 1 *
2 stop bits 5 3 2
Handshake Mode Code Changes
Software handshake 5 4 1
Hardware handshake with 2 characters after CTS 5 4 2 *
Hardware handshake with 1 character after CTS 5 4 3
* = factory setting
2–8