Checking Variations in Weight
Checking Variations in Weight z/T key, user guide display:
dif, d –, d + Code 2 6 3
Note:
Press the z/T key to toggle between LL, HH, variations and net value.
Practical Example: Checking the Variations in Weight by Piece Count
Symbol displayed: +/–
Application: Checking the piece count of bulk parts of identical weight;
e.g. checking packages of screws where the packages must have
the same weight; checking the fill quantity; sorting.
In the example, the tolerance range is entered using the numeric keys 0 – 9
Menu codes used in the example:
Function Code
Output of application data: on 4 2 1
Output all parameters 7 1 2
Step/Key Display Data Output
Place empty container
on the scale +
55.7 gcs
Press the =/z key
0.0 gcs
Press g/W to select the
reference sample quantity rEF
20 pcs
Place 20 pieces
in the container +
17.6 gcs
Press u/w, activate the
counting application +
20 pcs
The current piece count and nRef + 20 pcs
reference weight are output wRef + 0.8800 g
+
200 pcs
Press the z/T key +
200 pcs
The tolerance limit symbol
flashes; the user guide display
shows SEt = target weight
Press the z/T key
to store the value +
200 pcs
3–28
To Next Page
Loading...
