Declaration of Conformity
CE Marking of Sartorius Devices
In 1985, the Council of the European Community approved a resolution
concerninga new approach to the technical harmonization and standardization
of national regulations. The organization for monitoring compliance with the
directives and standards concerning C marking is governed in the individual
EU Member States through the implementation of the EC Directives adopted
by the respective national laws.
Sartorius complies with the EC Directives and European Standards in order to
supply its customers with weighing instruments that feature the latest advanced
technology and provide many years of trouble-free service.
The C mark may be affixed only to weighing instruments and associated
equipment that comply with the applicable Directive(s):
Council Directive 89/336/EEC “Electromagnetic Compatibility (EMC)«
This Directive regulates the use of equipment that can cause electromagnetic
interference or whose functioning can be influenced by such interference:
The safety requirements are
– limitation of emissions
– defined immunity to interference
The Declaration of Conformity is included in this manual.
For further information concerning C marking on Sartorius equipment,
please request the corresponding brochure available under publication no.
WYD6056-p98023.
Important Note:
Additional instruction manual(s) that belong to these Operating Instructions:
Guide to Verification of Weighing Instruments with the YCO01IS-0CE or
YCO02IS-0CE.
Please carefully read, complete and file this Guide
1–29
To Next Page
Loading...
Need help?
General