Data Output at Defined Intervals
You can reduce the volume of data in the “auto print” mode by defining the
interval at which data will be output automatically. This auto print interval is based
on the number of display updates.
Auto print interval Code Changes
1 display update 6 3 1 *
2 display updates 6 3 2
5 display updates
1
) 633
10 display updates
1
) 634
20 display updates
1
) 635
50 display updates
1
) 636
100 display updates
1
) 637
Automatic Taring after Data Output
You can have the scale tare automatically (=/z key function) after one of the
following keys is pressed:
Code Changes
No function 6 4 1 *
Automatic taring after pressing the p/p key 6 4 2
Automatic taring after pressing the S/a key 6 4 6
Automatic Output of the Application Parameters
You can have the application parameters and results printed out or transferred to an
on-line computer (e.g. checkweighing limits, tare memory, etc.) automatically when
the application is activated.
Code Changes
Off 711*
On 712
1
) blocked for all verifiable models
* = factory setting
2–10
To Next Page
Loading...
Need help?
General