Accessing the Menu
– Press e/o (18) to turn off the scale.
Turn the scale back on.
– While all segments are displayed, briefly hold
down the =/z key (14).
– Release when “1” (“–C–”) is displayed.
Note:
If you use the scale as a legal measuring instrument,
the “external calibration” function is blocked.
Only menu items that are permitted for scale
operation in legal metrology can be read and
changed by the user!
– Press u/w (12) until “8” appears.
– Press p/p until the 2nd number of the
code appears.
– Press u/w until “5” appears
– Press p/p until the 3rd number appears
(when you move to this number, the previously set
menu code will appear).
– Press u/w to select “4.”
– Confirming Code Changes
Press =/z (14) to confirm the code you have
just set (this is indicated by the “o” after the code).
Note:
– To store the new menu code setting, press
=/z (14) for more than two seconds until the
self-test function starts.
2–2
▼
▼
▼
▼
▼
▼
▼
▼
C
To Next Page
Loading...
