“1” and “-C-” appear in the user
guide display.
(If “-L-” appears, set the menu code 8 1 1.)
To select a menu code, press u/w
(increases a number in increments) and
p/p (advances to the next number).
(see diagram)
Press =/z to confirm your selection.
Press p/p to move to the first number
on the left
Hold down =/z for 2 seconds to store
the menu code change(s)
Setting a Menu Code
Turn off the scale; then turn it back on. While all segments are displayed,
briefly hold down =/z.
To Next Page