– Unfasten the retaining plate from the back
of the scale
– Unwind the cable as far as required and then
refasten the retaining plate
Leveling the Scale Using the Level Indicator
§ Level the scale using the level indicator as a guide.
$ Extend the leveling feet (turn clockwise)
to raise the scale
$ Retract the levelling feet (turn counterclockwise) to
lower the scale.
§ When the air bubble is exactly centered, use the
open-end wrench (spanner) to tighten the locknuts.
Important Note:
If you install the scale on a cart or trolley, it is sufficient
to level the scale once. Scales used as legal measuring
instruments are not allowed to be installed on a cart
or trolley!
§ Place the load plate on the scale base
1–11
To Next Page
Loading...
Need help?
General