Satec PM172EH series User Manual

46 Chapter 4 Setup Menus
4.14 Access Control Menu
Î Î Î Î
This menu can only be accessed via the Setup Change Menu (CHG). It is
used in order to:
• change the user password
• enable or disable password check from the front
panel keypad
• enable or disable password protection for
downloading setups and resetting data through
communications
To view an option setting:
9 Press to activate the middle window.
9 Use the up/down arrow keys to scroll to the desired option
(PASS, CtrL, Port).
Password Setting Password Protection Password
Protection
for the keypad for communications
To change the password:
9 Press to activate the lower window.
9 Use the up/down arrow keys to modify the password. The
password can be up to four digits long.
9 Press to store your new password, or to
leave the password unchanged.
To enable/disable password checking:
9 Press to activate the middle window, and then use
the up/down arrow keys to move to the CtrL or Port entry.
9 Press to activate the lower window.
9 Use the up/down arrow keys to change the password
checking status: select OFF to disable password
protection, or select On to enable password protection.
9 Press to store your new option, or to leave
the option unchanged.
To quit the setup menu:
9 From the middle window, press or .
SELECT
CH
G
A
cc
S
Ï
Ð
ENTERENTER
ENTER
SELECT
SELECT
SELECT
ENTER
SELECT
ESC
ESC
ENTER
ESC
AccS
8780
PASS
AccS
OFF
CtrL
AccS
OFF
Port

Satec PM172EH series Specifications

General

Brand	Satec
Model	PM172EH series
Category	Measuring Instruments
Language	English