To Next Page
X
xreeseSep 5, 2025
How to fix incorrect label sensor selection on my SATO CG408?
- TtwattsSep 6, 2025
If you selected an incorrect label sensor on your SATO Label Maker, set the sensor correctly by printer setting tool.
How to fix incorrect label sensor selection on my SATO CG408?
If you selected an incorrect label sensor on your SATO Label Maker, set the sensor correctly by printer setting tool.
How to resolve incorrect label sensor selection on my SATO CG408?
If you have incorrect label sensor selection on your SATO Label Maker, set the sensor correctly by printer setting tool.
What to do if the cover of my SATO Label Maker is open?
If the SATO Label Maker cover is open, ensure that it is closed properly.
Why my SATO CG408 Label Maker does not turn on?
If the SATO Label Maker is not turning on, it may be due to the power connector or AC adapter not being properly connected.
General| Resolution | 203 dpi |
|---|---|
| Max Print Width | 104 mm |
| Print Method | Thermal Transfer |
| Max Print Speed | 4 inches/sec |
| Media Roll Diameter | 127 mm (5 inches) |
| Memory | 4 MB Flash |
| Interface | USB, Serial, Ethernet |
| Media Sensor | Reflective and Transmissive |
| Media Thickness | 0.06 mm - 0.19 mm |
| Ribbon Length | 100 m (328 ft) |
| Label Thickness Range | 0.06 mm - 0.19 mm |
Explains symbols used for safety warnings and their meanings.
Detailed steps for loading roll and fan-folded media into the printer.
Instructions for installing carbon ribbon for thermal transfer printing.
Procedures for connecting the printer to a host computer via various interfaces.
How to generate test labels for diagnostic purposes.
Procedure for running factory diagnostic tests on the printer.
How to configure printer settings and select various modes.
Interpreting LED indicators and buzzers for error identification.
Common printer problems and their recommended solutions.
Steps to diagnose and resolve issues with printer interfaces.
Using test prints to identify and resolve print quality issues.
Procedures for cleaning critical printer components for optimal performance.
Instructions for user-replaceable parts like the print head and platen roller.
