SATO CL408 - Page 198

OA Font type. Specifies the OCR-A font with dot matrix. Page 4-34
CL408 CL608 CL412 CL612
OA Font Matrix 15W x 22H 22W x 33H
OB Font type. Specifies the OCR-B font dot matrix. Page 4-34
CL408 CL608 CL412 CL612
OB Font Matrix 20 W x 24H 30W x 36H
Paa Character Pitch. Designates the number of dots between characters.
aa = Number of dots between characters (01-99)
Page 4-26
PR Fixed Font Spacing. Returns the printer to fixed character spacing
mode.
Page 4-25
PS Proportional Font Spacing. Places the printer in the proportional
character spacing mode. Will not work with U Font.
Page 4-28
Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total number of labels to print for the job
(000001-999999)
Page 4-59
R Rotate, Moving Base Reference Point. Rotates the printing of all
subsequent images by 90 degrees counterclockwise each time it is
used. Also moves the base reference point.
Page 4-68
RMaaaa,bbbb Mirror Image. Prints mirror image of data.
aaaa = Horizontal distance in dots of the image area to be
mirrored.
bbbb = Vertical distance in dots of the image area to be
mirrored.
Page 4-42
S Font type. Specifies the 8W x 15H dot matrix font (including
descenders).
Page 4-34
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer’s volatile memory. See Kab90cc to
recall the character for printing.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Specifies data stream format to follow
B Binary
H Hexadecimal
cc = Memory location to store the character.
Valid locations are 21 to 52 or “!” to “R” in hex values.
(data)= Data to describe the character.
Page 4-21
U Font type. Specifies a 5W x 9L dot matrix font (including descenders). Page 4-34
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
Page A-69001035 Rev. ESATOCL SeriesPrinters