SATO CL408 - Page 199

Vbbbb Vertical Position. Specifies a field’s vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
Page 4-57
CL408 CL412 CL608 CL612
bbbb = New Vertical Position 0001-1424 0001-2136 0001-1424 0001-2136
WBa Font type. Specifies the 18W x 30L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-38
WDHaaaaVbbbb
XccccYdddd
Copy Image Area. To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
Page 4-31
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-38
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
Page 4-34
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
Page 4-34
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
Page 4-34
XWa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-38
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-38
Z Stop Code. Ends all print jobs. Page 4-72
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
SATOCL Series Printers9001035 Rev. EPage A-7