SATO CL408e - Page 175

Page 9-21
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
PCMCIA Memory Expansion Installation
REMOVE (2) SCREWS
AND WASHERS FROM THIS
END OF STANDOFFS
(STEP 2)
REMOVE (2) SCREWS,
NUTS AND STANDOFFS.
THIS HARDWARE WILL BE
MOUNTED ON THE MAIN
PCB BOARD
(STEP 1)
HOLES FOR
MOUNTING
HOLES FOR
MOUNTING
CONNECTOR TO
MEMORY BOARD
MAIN PCB BOARD SHOWING WHERE THE
MEMORY BOARD WILL BE INSTALLED
CONNECTOR TO MAIN
PCB BOARD
Fig. 9-35
Fig. 9-36