What does a framing error mean on my SATO s84ex?
A framing error on your SATO Label Maker indicates that the RS-232C settings are incorrect or the cable connection is faulty. To solve this, adjust the interface settings correctly and check that the cable is properly connected.
What does overrun error mean on SATO s84ex Label Maker?
An overrun error on your SATO Label Maker suggests that the RS-232C settings are incorrect or the cable connection is faulty. Ensure that the interface settings are correctly adjusted and that the cable is properly connected.
General| Max Print Length | 39.37 inches |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| Connectivity | USB, Serial |
| Supported Barcode Types | Data Matrix, PDF417, QR Code |
| Supported Media Types | Roll, Fanfold |
| Media Thickness | 0.002 to 0.008 inches |
| Operating Temperature | 41 to 95°F (5 to 35°C) |
| Dimensions | 18.11" D x 12.6" H |
| Print Width | 4.09 inches |
| Max Print Width | 4.09 inches |
| Memory | 16MB Flash, 32MB SDRAM |
Outlines essential safety and environmental considerations for printer installation.
Explains how to connect the printer to host computers using various available interfaces.
Details the procedure for safely connecting the printer to an AC power source.
Describes the correct steps for powering the printer on and off to prevent malfunctions.
Provides step-by-step instructions for loading the ribbon into the printer correctly.
Outlines the process for loading media, with or without a dispenser, into the printer.
Provides intervals and procedures for cleaning essential print head and platen roller components.
Lists common printer errors, their causes, and corresponding countermeasures for resolution.
Provides a systematic checklist for diagnosing and resolving common printer operational issues.
Offers specific steps for troubleshooting issues related to various printer interface connections.
To Next Page
