EasyManua.ls Logo

SBC PCD7.D450WTP Series - Network Configuration

SBC PCD7.D450WTP Series
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-2
Saia-Burgess Controls AG
27-621 ENG07 Manual Web Panel MB - PCD7.D450WTPx and PCD7.W470WTPx
Network
Structure and description of the setup menu
4
4.1 Network
This is where you can congure the network settings for the panel. Depending on 
the network, the connection may also work without setting a gateway or DNS server. 
You can exit the menu using the Setup button.
4.1.1 DCHP On
If DCHP is o󰀨, an IP must be set by the user. Otherwise all the necessary settings 
are acquired by the DCHP server.
4.1.2 TCP/IPaddress
IP address of the panel.
4.1.3 Subnet Mask
Subnet mask of the network on which the panel is located.
4.1.4 Default Gateway
IP of the standard gateway.
4.1.5 PrimaryDNSServer
IP of the primary DNS server.
4.1.6 SecondaryDNSServer
IP of the secondary DNS server.

Table of Contents