Scaime ipe 50 - Index

30 pages

Save Page as PDF

To Next Page

To Previous Page

INDEX

This user manual is a user manual complementary to the user manual series IPE50

1/2

16 Basic function P3

17 Selectable operating modes

18 port communication RS232 and 485 P17

18.5 communication protocol P24

19 Printer output P26

Main Page

Index2
Basic Functions3
Auto Power off Function3
Multi Range Functioning (for Legal for Trade Approved Instruments)3
Date/Time Adjustment3
"Screen Saver" Function4
Printing4
Reenabling the Printouts and the Indicator Functions4
Selectable Operating Modes5
Hold: Freezing the Weight on the Display (Hld)6
Peak: Weight Max Detection (Peak)6
Alibi Memory (Alibi)6
Setting Sampling Time6
Reading of the Weights Carried out7
Initialization of the Alibi Memory8
Serial Commandds8
Weight Storage8
Weight Reading8
Input/Output (in Out)9
Horizontal Totalizer (Sum of Lots -> Tot 0)10
Totalisation Operations10
Vertical Totaliser (Sum by Recipe -> Tot S)11
Piece Counting (Coun)11
Totalisation with Printing11
Printing and Zeroing of the Totals11
Counting Procedure12
Piece Counting in Extraction12
“Er.mot” Error Due to Weight Instability During the Sampling12
Minimum Weight of the Sample13
Printing under Counting Mode13
Diplay and Modification of Average Piece Weight (APW)13
Block Diagram Serial Output RS232 and 48514
Serial RS232 and 485 Output15
Serial Port RS232 and 485 (Unidirectional) (Printer, Repeater or PLC)15
Serial Port RS232 and 485 (Bidirectional) (PLC, Master for Network)15
Transmission Requested from an External Device "Onde" Parameter15
Transmission When Print Key Pressed “Prin.std”/“Prinex”16
Transmission in RS 485 Serial Mode “485” Parameter16
Continuous Transmission “All.std”, “All.ext and ALL.MAX”16
Transmission on Stability “Stab.st” and “Stab.ex” Parameter16
PC SEL Selection Bidirectionnal Output17
Com.prn Unidirectionnal Output17
Com.pc TRANSMISSION Bidirectional18
Pcmode Transmission Serial Output18
Baud SET BAUD RATE18
Bit Set Parity, Word, Stop Bit18
Serial Commands Format19
Version Reading Command19
Extended Weight Read Command19
Reading Command of Microvolt Relative to the Weight19
Manual Tare Command20
Zero Command20
ESC or C Command20
Channel Selection (in IND.CH Mode)20
Print Command21
Command for Viewing Temporary Message on the Display21
Command for Setting Display Visualisation Interval21
PC Confirmation Command/Serial Command for Setting the Apw21
Serial Command Which Supplies the Indicator Status22
Key Pressure Simulation Command22
Transmission Protocols23
Standard String23
Extended String23
Programming the Printouts25
Prconf Configuration of the Printouts26
Lang Printing Language26
Bline Empty Line at the Beginning of the Printout26
Intes Printing of Heading26
Ntik Prints Ticket Number27
Endpag Selection of Page End Printing27
Term Setting Terminator27
Pform Print Formatting27
Vdbar Selecting Bar Code's Vertical Distance of the Preceding Texts28
Defaul Printout Default28
Filds Printing Fields28
Barc Prints the Bar Code28
Lmbar Selection of Left Margin29
Wbar Selection of Bar Code Font Width29
Pntvb Printing of the Bar Code's Numeric Field29
Ptest Printing Test29
Ticket Example30

Scaime ipe 50 - Index

Table of Contents

Related product manuals