3
16 BASIC FUNCTION
Complement of the user manual 1/2
16.1 AUTO POWER OFF FUNCTION
It is possible to automatically turn off the indicator (from 1 to 255 minutes), or disable it; the auto power
off takes place when, with unloaded scale, or a key has not been pressed for the time set: the display
shows the “- oFF – “ blinking message and the indicator turns off.
For the setting, follow the procedures below:
- Select menu F.Mode.
- Press ENTER to enter the menu.
- Press ->0<- many times (to scroll ahead through the parameters) or ->T<- (to scroll backwards) until
one finds the “AutoFF” parameter.
- Press ENTER to enter the parameter.
- With the ->0<- or ->T<- keys select the possible options: “diSAb” (auto switch-off disabled), “EnAb”
(auto switch-off enabled).
- Confirm with ENTER if “EnAb” has been selected, one will be asked to enter the number of minutes
after which the indicator should turn off: enter a number between 1 and 255 (using the MODE key to
select the digit to be modified and ZERO/TARE to decrease/increase it) and confirm with ENTER
- Press many times the C key until the display shows “SAVE?”.
Press ENTER to confirm the changes made or another key for not saving.
16.2 MULTI RANGE FUNCTIONING (for legal for trade approved instruments)
The multi range functioning allows to subdivide the scale capacity in two ranges, each which is up to
3000 divisions, improving in this way the first range division in the dual range and the first two ranges in
the triple range.
For example, with a 10 kg cell platform it is possible to approve the weighing system with:
- A single range: 6 kg capacity and 2 g division (3000 div.).
- Dual range: 6 / 3 kg capacity and 2/1 g division (3000 + 3000 div.).
NOTE: The selection of the range number with multirange functioning is made during the indicator’s
calibration
16.3 DATE/TIME ADJUSTMENT (OPTIONAL)
The indicator can be fitted with the date/time option; in this case, the “CLoCK” message is shown when
instrument is turned on.
To set the date/time follow the procedure below:
- Select menu F.Mode.
- Press ENTER to enter the menu.
- Press ->0<- many times (to scroll forwards through the parameters) or ->T<- (to scroll backwards) to
find the “CLoCK” parameter.
- Confirm with ENTER/PRINT: in this order one will be asked to enter the day, month, year, hour, and
minutes. The entry of each parameter must be confirmed with ENTER
- Press the C key many times until the message “SAVE?” appears on the display.
- Press ENTER to confirm the changes made or another key to not save.
- It is possible to programme the date and time during the weighing, pressing in sequence the F and
8 keys.
- The “CLoCK” parameter is not displayed if there is no date/time option.
To Next Page
Loading...
