RTC
®
4 PC Interface Board
Rev. 1.3 e
4 Principle Of Operation
22
innovators for industry
10
Legend
1 Variable polygon delay, shorter than the specified edgelevel.
2 Variable polygon delay, longer than the edgelevel.
The laser is turned off between the two mark or arc commands.
3Mark delay.
Time
Laser
LaserOn
Delay
LaserOff
Delay
Mark
Command
Mark
Command
Last Mark
Command
In This Polyline
LaserOn
Delay
LaserOff
Delay
1
2 3
Laser control timing during a polyline with variable polygon delays.
An edgelevel was defined with the command set_delay_mode.
To Next Page
Loading...
