Daily cleaning
Schaerer Coffee Vito
M. Schaerer Ltd. Cleaning instruction 02.2009 V00
Gewerbestrasse 15 QRCSCV_EN
3302 Moosseedorf
Switzerland
info@schaerer.com www.schaerer.com Order number: 022021
Hygiene Vorschriften nach HACCP einhalten! Auszug von HACCP:
Never refill milk container. Always throw leftovers away.•
Always clean the milk container before filling it with fresh milk.•
Fill up with fresh milk, chilled to 3 °C - 5 °C, just before restarting the machine.•
Use pasteurized or ultra high temperature treated (UHT) milk! Do not use raw milk! The milk must be homo-•
gonised!
For optimum hygiene use a milk cooler (optional) to maintain milk temperature.•
If equipped the refrigerator / cool-ing unit (optional) must be cleaned at least once a week!•
CAUTION!
User at risk!
3
5
Disassemble foamer head. ►
Place the parts (together with the milk ►
hose) for ± 30 minutes in a solution of
500 ml hot water and 25 ml cleaning
agent (Milkpure or Daypure).
Rinse the parts thoroughly under ►
running (hand) warm water.
Re-install the parts. ►
Press ►
.
Depending on the status of the
machine, the display might show
alternative information.
Press on the indicated area. ►
Press ► .
Cleaning Program (witk milk / without milk)
Refer to the safety instructions and to the chapter „Cleaning“ inside the user manual!
Never reach into the machine or under the beverage outlets during the automatic cleaning!
Never use force, strong pressure or sharp objects on the Touch Screen!
CAUTION!
User at risk!
CAUTION!
Machine at risk!
Cleaning Menue
Press on the cleaning symbol ►
The menue „Customer Care“ with all ;
available programs appears.
2
Select any required program. ►
3
1
Option 1: Machine without drainage
Place a suitable container under the ►
outlet (capacity: ± 1 litre).
Option 2: Machine with drainage
Move the outlet to the lowest position. ►
Press ► .
2
Option 1: with milk
See ►
6
.
Option 2: without milk
Mix 25 ml detergent (Milkpure or ►
Daypure) and 500 ml cold water in a
cleaning container.
Place the milk hose (including nozzle) ►
into the cleaning solution.
Press ► .
Cleaning process is running. ;
Fill the cleaning container with ± 400 ml ►
of fresh water.
Place the milk hose (including nozzle) ►
into the cleaning solution.
Press ►
.
Rinising process is running. ;
Request for foamer head cleaning ;
appears.
4
Press ► .
Follow the instructions on the touch ►
screen.
Insert cleaning tablet. ►
Press ►
.
Cleaning process is running. ;
Cleaning process is completed and ;
will be quit automatically.
6
Die Schäumerreinigung muss nur
bei Maschinen mit Frischmilch du-
rchgeführt werden!
Press Foamer Cleaning. ►
See ►
2
to
5
of the Cleaning Pro-
gram.
Foamer Cleaning process is com- ;
pleted and will be quit automatically.
Foamer cleaning
Press Mixer Rinsing. ►
Press ►
.
Mixer Rinising process is running. ;
Mixer Rinising process is completed ;
and will be quit automatically.
Mixer Rinsing Machine surfaces
Wipe the machine surfaces with a damp ►
(paper) tissue after the cleaning proc-
ess.
CAUTION!
Do not use any abrassives!
1
Select Cleaning Program. ►
Make a selection in the following menu ►
(switch off / resume operation).