www.schaerer.com
17
BASCV - EN
Version 00 02.2009
Software
Customer Check-up After every 10,000 coffees there is a daily message to the effect that
customer attention is due.
This must be carried out within one week, otherwise the message is
displayed after every brew.
Carry out Customer Check-up operation 1/10.000. ►
See Customer Check-up Instruction 1/10.000. See Warranty chapter!
Setting
The main menu “Setting” shows the following options:
Recipes and Beverage Button•
Boiler Temperature•
Reset•
Clock and Date•
Language•
Display Contrast•
Filter/Softener Fitted•
Water Hardness/Capacity•
Warm-Up Rinse•
Foam head rinsing•
Operating options •
Introduction•
Recipes and Beverage
Button
Touch pad.
The menu shows the options:
Cup Volumes•
Change Recipes•
Button Allocation•
Weigh Grounds•
Cup Volumes
more
less
leave without change
save values
start test
Cup volumes are matched to the cups used. Individual Beverage ingre-
dients are matched to the new cup volumes with no effect on composi-
tion and quality.
Touch the beverage button for the desired beverage. ►
Test dispensing by touching ► .
Change cup volume as required ►
Save with ► .
To Next Page
Loading...
