Schaerer Coffee Vito

www.schaerer.com
6
BASCV - EN
Version 00 02.2009
Produktbeschreibung
Operating
Operating
Initial startup on delivery from the manufacturer is via a display-led Installation Program.
For Initial Startup see Installation Instructions
Switch On Coffee Machine
Press and hold ON/OFF button ► for longer than 2 seconds.
Coffee machine switches on and heats up. ;
; When the machine is ready to dispense beverage, the Ready Display appears.
Dispense Beverage
Pressing the beverage button triggers dispensing of the beverage selected.
Illuminated ring round button = Dispenser ready•
Flashing ring round button = Dispensing Beverage•
Place suitably sized receptacle below dispenser ►
Press desired beverage button ►
Desired beverage and progress of dispensing indicated in display. ;
Dispense Milk or Foamed Milk (optional)
Pressing a beverage button showing milk or foamed milk starts dispensing .
Dispensing continues for as long as the button is held.
Dispense Hot Water
Pressing the hot water button starts dispensing. If less water is required than is set to dispense, dispensing
can be stopped by repeatedly pressing the button.
Steam Outlet (optional)
Steam is dispensed for as long as the button is held. Steam:
warms beverage •
manually foams milk•
Warming Beverage
Ein möglichst schlankes und hohes Chromargangefäß mit Griff verwenden.
Use as tall and slim as possible cromargan jug with handle. ►
Fill jug to no more than half way. ►
Immerse steam nozzle deeply into jug. ►
Press and hold steam button until desired temperature is reached. ►
Release steam button. ►
Swing steam outlet over to drip tray. ►
Briefly press steam button. ►
Residues in steam dispenser tube are rinsed out. ;
Wipe steam outlet with damp cloth. ►
Ready Display
CAUTION!
Hot steam!