Schaerer Coffee Vito

www.schaerer.com
19
BASCV - EN
Version 00 02.2009
Software
Filter/Softener Fitted Whether filter is fitted or not is entered here.
This affects the descaling intervals.
Water Hardness/Capacity On plumbed coffee machines with a constant water supply (without an-
ti-scale filter, optional) and coffee machines with a water tank the water
hardness (carbonate hardness) is set here.
With fitted filter and constant water supply:
Filter capacity is set here (filter capacity can be found in the anti-scale
filter documentation).
Warm-Up Rinse Here enter the setting as to whether the coffee machine should rinse
out the brewing unit with hot water after heating up.
Recommended setting: active.
Operating options The following operating options are available.
Warm up pad
Self-service recommendation: inactive
Barista pad
Self-service recommendation: inactive
Second Level Toggle Pad
Self-service recommendation: inactive
ON/OFF button (direct/via PIN)
Recommendation for self-service: via PIN.
If „via PIN“ is set then the PIN for the cleaning level will be queried on
switching on or off.
See chapter Software - PIN Rights Access.
Menu pad
Self-service recommendation: delayed.
If „delayed“ is set the menu will only be shown if the display is pressed
twice.
See chapter software - Access Main Menu.
If customers serve themselves some functions can be switched to inactive. The inactivated pads will not
be shown on the readiness state display.
Introduction The Introduction program is started here.
Enter PIN
Individual levels may be protected with a PIN to prevent unauthorised access. For access to a PIN-protect-
ed level the PIN must be entered via the pad.
Touch ► in the Main Menu.
; A numerical keyboard display appears.
Enter required 4-figure PIN. ►
Confirm with ► .
Following entry of a valid PIN the assigned functions are available. ;
PIN- Entry Display