Schaerer Coffee Vito

BA SCV_EN
V05 | 04.2013
33
www.schaerer.comOperation
Hot water
► Place a cup under the hot water outlet.
Three different dosing variants are available for dispensing hot water:
CAUTION!
Hot fluid!
Option 1: Dosed
► Press the hot water button .
 The set quantity is dispensed.
 Dispensing cannot be interrupted.
Option 2: Freeflow
► Press and hold the hot water button .
 Dispensing continues as long as the button is kept pressed.
Option 3: Start/stop
► Press the hot water button .
► If desired, end the dispensing process by pressing the beverage button again.
Milk beverages
The dispensing process for milk beverages that contain multiple ingredients (coffee, choco-
late, etc.) and are stored on a beverage button is identical to the dispensing of coffee bever-
ages.
Hot milk
► Place a cup under the beverage outlet.
To dispense hot milk, three different dosing variants are available:
CAUTION!
Hot fluid!
Option 1: Dosed
► Press the [ Hot milk] button.
 The set quantity is dispensed.
 Dispensing cannot be interrupted.
Option 2: Freeflow
► Press and hold the [Hot milk] button.
 Dispensing continues as long as the button is kept pressed.
Option 3: Start/stop
► Press the [ Hot milk] button.
 The set quantity is dispensed.
► If desired, end the dispensing process by pressing the beverage button again.
Milk foam
► Place a cup under the beverage outlet.
The dosing variant can only be set by the service technician.
See "Operation" - "Dispensing" - "Coffee beverages".
The dosing variant can only be set by the service technician.