Schaerer Coffee Vito

BA SCV_EN
V05 | 04.2013
61
www.schaerer.comProgramming
Topping quality/foam quality
Coffee machines with a powder system have the parameter "Topping quality", and coffee ma-
chines with fresh milk have the parameter "Foam quality".
Macchiato pause
"Timer program"
In the "Timer program" menu, the switch-on and switch-off times can be programmed.
► Touch the field in the "Selection menu".
 The "Timer program" menu is displayed.
The menu contains the following subitems:
• Timer status
• Timer setting
• Timer overview
• Clear timer
• Timer info
Display/ display
text
Parameter description Setting range Notes
Topping quality Setting of the milk powder intensity.
► Touch the [Topping quality] field in the menu
"Milk&foam".
 The window "Topping quality" appears.
► Set by touching and .
► Confirm by touching .
 The new settings are active.
20 – 100 Reducing the value = lighter fla-
vour
Increasing the value = more inten-
sive flavour
Foam quality Setting of the milk foam quality.
► Touch the [Foam quality] field in the menu
"Milk&foam".
 The window "Foam quality" appears.
► Set by touching and .
► Confirm by touching .
 The new settings are active.
40 – 99 Reducing the value = finer foam
pores
Increasing the value = coarser
foam pores
Display/ display
text
Parameter description Setting range Notes
Macchiato pause By means of this parameter the pause time between
the milk and milk foam dispensing for a latte macch-
iato can be shortened or lengthened.
► Touch the [Macchiato pause] field in the menu
"Milk&foam".
 The window "Macchiato pause" appears.
► Set by touching and .
► Confirm by touching .
 The new settings are active.
1 – 20 The quality of a latte macchiato
generally improves when the pau-
se is extended.