Schaerer Coffee Vito

www.schaerer.com Cleaning
BA SCV_EN
V05 | 04.2013
50
Bean hopper
Old bean grease in the bean hopper can have a negative impact on the coffee quality.
CAUTION!
User at risk!
Danger of injury from the rotating grinding discs in the grinder.
Never reach into the bean hopper while the coffee machine is switched on.
► Wipe the inside of the bean hopper with a moist cloth.
► Clean the bean hopper lid with a moist cloth
► Dry the lid and hopper with a clean cloth.
Powder container
CAUTION!
Risk of machine
damage!
Never clean the product hoppers in a dishwasher. The hoppers can get damaged.
Clean the hoppers only with a damp cloth.
► Switch off the coffee machine using the button and pull out the power plug.
► Release the powder container by pressing the button and lift it out.
► Empty the powder container.
► Loosen the securing screw(s) and pull out the drive wheel(s).
► Pull out the slider.
► Take out the dosing screw(s) and thoroughly clean the component parts.
► Thoroughly clean the powder container with a damp cloth.
► Let the parts dry fully.
► Reassemble the dosing screws in the reverse order.
► Screw the securing screw(s) back onto the drive wheel(s).
► Reinsert the powder container by pressing the release button.
If using a twin topping container, i.e. with special compartments divided in the centre, for two
different products, e.g. milk powder and choco powder, different dosing screws are used. Use
dosing screw (1) for choc powder. Use dosing screw (2) for milk powder. It is best to label the
powder container from the very beginning.