BA SCV_EN
V05 | 04.2013
55
www.schaerer.comService and maintenance
Decalcification
Decalcification message
When the machine needs to be decalcified, a corresponding request appears on the display.
The decalcification interval depends on the following factors:
• Water hardness
• Water flow rate
• Use of a water filter
Danger of poisoning from ingesting or inhaling the decalcifier.
Do not drink or inhale the decalcifier or the rinse water output during the decalcification
process.
CAUTION!
Risk of machine
damage!
Household decalcifiers can destroy the coffee machine.
For decalcification, use Schaerer decalcifiers only. Liability cannot be accepted for
damage resulting from the use of other decalcifiers.
Option: Resetting the decalcification request
When the 1st display decalcification request appears, decalcification must be performed within
a week. The first display request can be overridden during that week.
► Touch the field.
The "Ready for operation" window appears and the machine is ready for use again.
Option: Forced decalcification
If no decalcification has been performed within a week of the first display request appearing,
beverage dispensing is disabled. The 2nd display request cannot be reset.
Decalcification preparation
The following utensils have to be provided for the decalcification process:
Option 1: With drip tray
• 2 bottles of Schaerer liquid decalcifier (0.75 dl each).
• 5 l collecting containers.
• Drinking water tank
• Sufficient drinking water for rinsing.
• The multitool and a screwdriver (size 3) for changing over from mains water supply to drink-
ing water tank (optional).
Option 2: With waste water outlet
• 2 bottles of Schaerer liquid decalcifier (0.75 dl each).
• Drinking water tank
• Sufficient drinking water for rinsing.
• The multitool and a screwdriver (size 3) for changing over from mains water supply to drink-
ing water tank (optional).
Start decalcification program
1st display request
2nd display request
Total amount of time that decalcification takes ca. 80 min
To Next Page
Loading...
