www.schaerer.com Operation
BA SCV_EN
V05 | 04.2013
34
To dispense milk foam, three different dosing variants are available:
Option 1: Dosed
► Press the [ Milk foam ] button.
The set quantity is dispensed.
Dispensing cannot be interrupted.
Option 2: Freeflow
► Press and hold the [Milk foam] button.
Dispensing continues as long as the button is kept pressed.
Option 3: Start/stop
► Press the [ Milk foam ] button.
The set quantity is dispensed.
► If desired, end the dispensing process by pressing the beverage button again.
Steam
► Place a cup under the steam wand.
To dispense steam, three different dosing variants are available:
Option 1: Portion control
► - Press the steam button.
The set quantity is dispensed.
Dispensing cannot be interrupted.
Option 2: Freeflow
► - Press and hold the steam button.
Dispensing continues as long as the button is kept pressed.
Option 3: Start/stop
► - Press the steam button.
The set quantity is dispensed.
► If desired, end the dispensing process by pressing the beverage button again.
Dispensing options
Stopping and cancelling beverage dispensing
To stop dispensing of a beverage, the "Beverage stop" parameter in the "Operating options"
menu must be activated.
Dispensing of a beverage is started.
► Select the active (flashing) beverage button again.
Dispensing of a beverage is stopped.
The notice "Beverage stop" appears on the display.
All set beverages are available for selection again.
The dosing variant can only be set by the service technician.
The dosing variant can only be set by the service technician.
See "Programming" - "Settings menu" - "Operating options".
To Next Page
Loading...
