Schaerer Coffee Vito

BA SCV_EN
V05 | 04.2013
69
www.schaerer.comProgramming
Warm-up rinsing
Rinse interval
Operating option
► Touch the [Operating options] field in the "Settings" menu.
 The "Operating options" menu is displayed.
The menu contains the following subitems:
• Warm rinse field
• Barista field
• 2nd level
• ON/OFF button ( button)
• Menu field
Display/ display text Parameter description Setting
range
Notes
Warm-up rinsing By means of this parameter the warm-up rinsing
can be switched on and off.
► Touch the [Warm-up rinsing] field in the "Set-
tings" menu.
 The setting switches between "active"
and "inactive" each time the field is
touched.
active / inacti-
ve
If warm-up rinsing is "acti-
ve", after heating up the
brewing unit is rinsed with
hot water and is warmed
up in the process.
Display/ display text Parameter description Setting
range
Notes
Rinse interval Starts a milk system rinse after a milk beverage
is dispensed and after the period defined by this
parameter.
► Press the [Rinse interval] field in the "Set-
tings" menu.
 The window for the rinse interval setting
appears.
► Set a rinse interval between 0–5min.
 The milk system rinse starts following a
delay equal to the time set here.
0–5min A setting of (0) causes the
system to be rinsed imme-
diately after a milk bevera-
ge is dispensed.
The "Plug&Clean" function
is activated in the machine
data.
Display/ display text Parameter description Setting
range
Notes
Warm rinse field
Main window with warm rinse field
activated.
By means of this parameter the warm rinse field
can be switched on and off in the main window.
► Touch the [Warm rinse] field.
 The setting switches between "active"
and "inactive" each time the field is
touched.
See also "Operation" - "Main touch screen win-
dow" for a detailed description.
active / inacti-
ve
For self-service mode it is
recommended that this
function is deactivated.
Otherwise the operator
could trigger a warm rinse
by mistake.