Schaerer Coffee Vito

www.schaerer.com Cleaning
BA SCV_EN
V05 | 04.2013
44
CAUTION!
Risk of machine
damage!
Never wash the brewing unit in a dishwasher as this may damage the unit considerably.
Only clean the brewing unit as described below.
► Remove the drip tray.
► Remove the grounds container.
► Unlock the brewing unit by pulling slider (A) toward you.
 The unlocked brewing unit falls into your hand on account of its own weight.
► Pull the unlocked brewing unit down while swinging it forward out of the machine.
► Turn the spindle of the brewing unit all the way anti-clockwise using the Multitool.
 The scraper (B) is in the scraper position.
► Push the funnel (C) out in the direction of the arrow.
► Remove any ground coffee residue with a dry brush.
► To clean, slightly lift the drop-in slide (D) away from the brewing screen.
► Clean the brewing screen under warm running water if necessary.
► Clean the brewing unit under warm running water if necessary.
► Allow the brewing unit to dry fully.
► Grease the O-ring of the brewing sieve with Molykote 111 grease.
► Slide the funnel (C) back on to the brewing unit.
► Turn the spindle clockwise back to the stop using the Multitool.
► Turn the spindle away from the stop using a brief 1/4 rotation.
► Insert the brewing unit into the machine in reverse order.
► Reinsert the grounds container.
► Reinsert the drip tray.
See Scope of delivery and accessories for more information on food-grade grease.