Improper handling of beans, water, milk, powder or other coffee ingredients can lead to health prob-
lems!
Comply with the hygiene regulations stipulated in HACCP!
Ź Demount the foamer head parts.
Ź Place the parts and milk hose ±30 min
in a solution of 500 ml hot water and
25 ml cleaning product (Milkpure).
Ź Clean all the parts in lukewarm running
water.
Ź Refit the foamer head parts.
Ź Mount the foamer head at the outlet so
that it engages with a "click".
Ź Select and continue with step 6.
Option: Plug & Clean
Perform the specified cleaning steps once
a week.
; The mixer rinse runs automatically.
Ź Continue with step 6.
Ź Select for machine cleaning.
Ź Follow the instructions on the touch
screen.
Ź Insert the cleaning tablet into the inlet
for ground coffee.
Ź Close the inlet.
Ź Select .
; Cleaning runs and ends.
Outer surfaces and
containers
Separate programmes
Option: Plug & Clean
Ź Select for machine cleaning.
Ź Push the milk hose adapter into the
"Plug&Clean" device.
Ź Select .
Ź Follow the instructions on the touch
screen.
Ź Insert the cleaning tablet into the inlet
for ground coffee.
Ź Close the inlet.
Ź Select .
; Cleaning runs and ends.
Ź Weekly foamer head cleaning, see
step 4.
Ź Wipe down the outer surfaces of the
machine with a damp paper towel.
Depending on the option available, per-
form the following actions:
Ź Rinse out the drinking water tank with
fresh water.
Ź Thoroughly rinse out the milk container
with fresh water.
Ź Thoroughly clean the waste water tank
and/or drip tray with a domestic clean-
ing product.
Foamer cleaning and mixer rinsing can be
performed separately.
Option 1: Foamer cleaning
Ź Press [Foamer cleaning] in the "Care"
menu.
Ź Select .
; Foamer cleaning starts.
Option 2: Mixer rinsing
Ź Press [Mixer rinsing] in the "Care"
menu.
Ź Select .
; Mixer rinsing starts.
See also "Safety instructions" - "HACCP hygiene regulations" in the operating instructions.
To Next Page
Loading...
