EasyManua.ls Logo

SCHOTTEL SV 1 - Page 82

SCHOTTEL SV 1
156 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2/
enSTD--Wa 109923707/3110
Piping Systems for Hydraulic, Lubrication and Similar Systems17
Preliminary Remark
These instructions shall be of information and help for
every person engaged in initial start--up, operation and
maintenance of SCHOTTEL systems. This requires to
read, understand and observe these documents.
These instructions are to be made available to every-
body carrying out works on the system.
We do not accept any liability for damages and troubles
in operation r esulting from disregard of these instruc-
tions.
It is taken for granted that every user is familiar with the
systems and informed on all possible dangers.
Only trained personnel is allowed to carry out any work
on the system.
References to illustrations in the text are written in
brackets, e.g. (1/3). The first number indicates the il-
lustration number in the manual, the second number is
the position number in the illustration.
All illustrations are diagrammatic projections without
any claim for completeness.
Any technical modification to SCHOTTEL systems not
carried out by personnel appointed by SCHOTTEL
does require written consent.
This excludes modifications or control settings detailed
in our instructions.
During any work carried out on SCHOTTEL systems it
is required to observe the Safety and Environmental
Protection Regulations SV 1 as well as the relevant
laws in force in the respective country of utilization.
Given that SCHOTTEL systems are subject to further
development we reserve the right of technical modifica-
tions.
Important instructions relevant to technical and oper-
ational safety are pointed out by the following symbols:
!
CAUTION
Indicates working and operating methods that are to be
strictly observed to exclude any risk for persons.
!
ATTENTION
Refers to working and operating methods that are to be
strictly observed to avoid damages to or destruction of
the material.
NOTE
Indicates exceptional features in the working process
that are to be observed.
i
INFORMATION
Application references and information.
These instructions were elaborated with utmost care.
In case of further information required, please contact:
SCHOTTEL GmbH
Mainzer Straße 99
D--56322 Spay
Phone +49 (0) 2628 / 61-- 0
Fax +49 (0) 2628 / 61--300
E--Mail info@schottel.de

Table of Contents

Related product manuals