SCOTT Protege - Setting Date and Time

Protégé Portable Gas Monitor
Instruction Manual
46 of 61
P/N 087-0038 Rev. J 02/10
4.6.4. Setting Date and Time
Figure 4-12. Set Clock Tab
Access the SET CLOCK tab to change alarm settings. The following options are available to users.
Synch with PC Clock - Allows users the option to synchronize the Protégé’s internal clock with the
PC clock.
Get - Reads the time setting of the Protégé presently connected and displays it on the Gas Monitor
Set Clock dialogue box.
Set - Uploads the time displayed on the Gas Monitor Set Clock dialogue box to the Protégé
presently connected.