Protégé Portable Gas Monitor
Instruction Manual
1 of 61
P/N 087-0038 Rev. J 02/10
1. Safety and General Information
WARNING
ALL INDIVIDUALS WHO HAVE OR WILL HAVE RESPONSIBILITY FOR USING OR TESTING THIS PRODUCT MUST READ
AND UNDERSTAND THE CONTENTS OF THIS MANUAL. THE PRODUCT WILL PERFORM AS DESIGNED ONLY IF USED
AND TESTED IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS. FAILURE TO FOLLOW
MANUFACTURER’S INSTRUCTIONS WILL RENDER THE WARRANTY AND APPROVALS NULL AND VOID. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY ALSO RESULT IN SERIOUS INJURY OR DEATH.
1.1. Important Notices
Scott Health and Safety can take no responsibility for use of its equipment if it is not used in
accordance with the instructions. If further operational or maintenance details are required but not
provided in this manual, contact Scott Health and Safety or their agent. Scott Health and Safety
shall not be liable for any incidental or consequential damages in connection with any modifications,
errors or omissions in this manual. While every effort has been made to ensure accuracy in this
owner’s manual, no responsibility can be accepted for errors or omissions. This publication is not
intended to form the basis of a contract, and the company reserves the right to amend the design,
content, and specifications of the detector without notice. Additionally, industry standards, codes,
and legislation are subject to change. Updated copies should be obtained by users to ensure the
most recently issued regulations, standards and guidelines are available.
The Protégé detector can be configured with multiple gas sensors in order to provide gas specific
protection for the user's application and compliance requirements.
To Next Page
Loading...
Need help?
General
