15.2.8 Measurement in alarm
When you record a measurement triggering an alarm, the status LED will be lit with the color of the highest level of
alarm reached: blue for the warning level, orange for danger level and red for alarm level. In the same time, a message
will inform you of the alarm levels and thresholds exceeded. Please refer to Ultranalysis Operating Instructions if you
need more details about alarms management.
15.2.9 End of survey
After recording the last measurement of the Survey, the SDT270 indicates you have completed the data collection by
displaying the following screen:
Press F1 Key three times to come back to Measurement screen of the SD270.
To Next Page
Loading...