EasyManua.ls Logo

Seac JACK - ALARM (Open Circuit Alarms)

Seac JACK
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12:30
01/01 Th
95%
MIX
PLANNER
LOGBOOK
ALARM
C
C
D
D
0.0 0:00
0 0.0
0.0
OC
DIVE m/min
DEPTH
ASC SPEED:
MAX DEPTH:
DECO VIOL:
TIME:
DEPTH:
B
C
D
YES
YES
YES
0
0
EXIT
35
English
ALARM (Open Circuit Alarms)
The ALARM Menu allows you to enable (YES) or disable
(NO) JACK's auditory alarms in open circuit mode.
m WARNING!
Except for special situations, we do not recommend disabling auditory
alarms. We recommend leaving all values set to YES.
ASC SPEED: (YES/NO): Alarm that signals an excessive ascent rate.
MAX DEPTH: (YES/NO): Alarm that signals that the MOD has been exceeded
(depth beyond which you should not proceed, based on the PPO
2
of the breathing
mix in use).
DECO VIOL: (YES/NO): Alarm that signals a violation of the mandatory
decompression stop.
(The Safety Stops and Deep Stops are not considered mandatory decompression
stops. Violating Safety Stops or Deep Stops does not activate the alarm).
TIME: Alarm that signals that the dive time set has been exceeded (in minutes).
DEPTH: Alarm that signals that the depth set has been exceeded (in meters or
feet - see the DIVE SET menu).
JACK
unlocked
+
-Next
value
Use only in
scuba mode

Other manuals for Seac JACK

Related product manuals