Connect your JACK computer to your Mac or PC.
JACK can be connected to your Mac or PC to download dives or
for performing updates.
Updating your JACK Dive Computer
It's very important to keep your JACK Dive Computer consistently
up to date with the most recent version of the software.
The JACK must be connected to a Mac or PC using the USB
cable to run the updates.
m WARNING!
During the update, a new version of the operating system will
be installed.
After every update:
- Check that JACK's settings (mix. algorithms, deco stops,
etc.) are set correctly for your next dive.
- The compass must be recalibrated.
- After every update, JACK runs a “reset to default” for the
tissue settings (see “RESET TO DEFAULT” in this manual).
- The device must be fully recharged.
To Next Page
Loading...
