Seac JACK - TECHNICAL CHARACTERISTICS OF THE COMPUTER; Hardware; Certification; Software

8
English
TECHNICAL CHARACTERISTICS OF THE
COMPUTER
Hardware
The computer is built with mixed materials: highly resistant
technopolymer material, stainless steel, and mineral glass.
The screen features a 100% dot matrix display with 80x80 pixel
resolution and "SuperBright" LED backlighting.
Special focus went into developing a navigation system that allows
divers to access settings easily and intuitively.
• Sensor precision guarantee: 130 m.
• Maximum depth: 150 m / 500 ft (Sport edition).
• Precision of the Absolute Pressure Measurement.
min max
p = 0 .. 5 bar -20 mbar +20 mbar
p = 0 .. 10 bar -40 mbar +20 mbar
p = 0 .. 14 bar -100 mbar +20 mbar
Maximum sensor error in the Temperature measurement:
-2 / +6°C.
When worn on the wrist, temperature detection out of the water
is affected by body heat. For an accurate temperature reading,
immerse the device in water or leave the device away from any
sources of heat for a few minutes.
Certication:
The computer's hardware has obtained EC and EN13319
certications.
Software
Algorithm: The computer uses the Bühlmann ZHL-16B model
for scuba dives.
Freedive algorithm: The computer uses the iPTM (Individual
Protection Taravana Model) for freedives.
Brief summary of Technical Characteristics
SEAC JACK
Taravana
Algorithm
Yes (iPTM)
Hemoptysis
Algorithm
Yes
Data in Freedive
mode
Minimum recovery time suggested by
Algorithm, Recovery time timer, Surf
time, Depth, Dive time, Dive number,
Speed, Max depth, Water temperature,
Time, Graph prole of last dive, Session
summary with averages.
Alarms Depth set, constant steps, predened
steps, dive time, hydration.
Alarm type Audio + visual