Fig.21 IP Camera IP Address Settings
“IP Address”
This item determines the IP Camera’s IP
Address.
“Subnet Mask”
This item sets the IP Camera’s Subnet Mask. The value is normally 255.255.255.0
“Gateway”
This item sets the IP Camera’s Gateway address.
“Obtain an IP address”
This allows
you to
choose
either to set the IP Camera’s IP
Address manually or via
DHCP. The IP Camera
will reboot after the above settings have been changed.
ii. DNS Server IP
Fig.22 IP Camera IP DNS Server IP
“Primary
DNS Server IP”
This item sets the IP Camera primary
DNS Server IP address.
“Secondary DNS Server IP”
This item sets the IP Camera secondary DNS
Server IP address. The IP Camera
will use the secondary DNS Server IP address if the Primary DNS
Server IP
address is not working.
iii. Port Number
Fig.23 IP Camera Port Settings
“HTTP Port
Number”
By default the port number is 80
“Communication to Camera Port Number”
By default the port number is 9001
iv. Ethernet
Fig.24 IP Camera Ethernet Settings
IP Camera Manual 24
To Next Page
Loading...
