4. Enter the following information on the page:
Line #1:
Private
IP:
Type in the
camera’s IP address
, for example: 192.168.0.5 (Look at
IP Camera’s IP Address LCD display for the last 3 digits of
the camera’s
IP address)
Private
Port:
80
Type:
TCP
Public
Port:
80
Line #2
Private
IP:
Type in the
camera’s IP address
, for example: 192.168.0.5 (Look at
IP Camera’s IP Address LCD display for the last 3 digits of
the camera’s
IP address)
Private
Port:
9001
Type:
UDP
Public
Port:
9001
5. Click Apply to save the settings. IP Camera should now be configured to work
with your router and be accessible from the Internet.
SMC7004AWBR – Barricade 4-port 11Mbps Wireless Broadband Router
1. Log into your router.
2. Click on Virtual Server on the left side of the page.
3. Enter the following information on the page:
For ID #1:
Service
Port:
80
Private
IP:
Type in the
camera’s IP address
, for example: 192.168.0.5 (Look at
IP Camera’s IP Address LCD display for the last 3 digits of
the camera’s
IP address)
Enable:
Checked
in
For ID #2:
Service
Port:
9001
Private
IP:
Type in the
camera’s IP address
, for example: 192.168.0.5 (Look at
IP Camera’s IP Address LCD display for the last 3 digits of
the camera’s
IP address)
Enable:
Checked
in
4. Click Save to save the settings. IP Camera should now be configured to work
with your router and be accessible from the Internet.
Appendix B: Methods to Update IP Camera Firmware
You can update IP Camera’s firmware using any
of the following methods.
Method 1:
Using Netility
IP Camera Manual 58
To Next Page
Loading...