Security Labs PTZ IP Camera - Page 57

SpeedStream 2604 4-port DSL/Cable Router
SpeedStream 2624 Wireless DSL/Cable Router
SMC SMC2404WBR Barricada Turbo 11/22 Mbps
Wireless
Cable/DSL Broadband Router
SMC7004VBR
Barricada Cable/DSL Broadband Router
SMC7004CWBR
Barricada Wireless Cable/DSL
Broadband Router
SMC7004AWBR Barricade 4-port 11Mbps Wireless
Broadband Router
3Com (http://www.3com.com)
3C857-US – OfficeConnect Cable/DSL Gateway
3CRWE52196 – OfficeConnect Wireless Cable/DSL Gateway
1. Log into your router.
2. On the main page, select Firewalls on the left side of the page.
3. Select the Virtual Servers tab at the top of the page.
4. Click New on the right side of the page to open the Virtual Server
Settings dialog box.
5. Type in the camera’s IP address in the Server IP address text box. (Look on
the IP Camera IP address LCD display for the last 3 digits of the camera’s IP
address.)
6. Under Local Service, select Custom.
7. Under Custom Service Name, type in: IP Camera.
8. Under Specify Custom Service Ports, type in: 80, 9001.
9. Click Add to save the settings. The IP Camera should now be configured to
work with your router and be accessible from the internet.
Belkin (http://www.belkin.com)
F5D6230-3 – Wireless Cable/DSL Gateway Router
1. Log into your router.
2. On the main page, select Virtual Server on the left side of the page under the
Security section.
3. Enter the following information on the page:
Line #1:
Private IP: Type in the camera’s IP address . (Look on the IP Camera IP Address
LCD display for the last 3 digits of the camera’s IP address)
Private Port:
80
Type: TCP
Public
Port: 80
IP Camera Manual 49