Security Labs PTZ IP Camera - Method 3: Using FTP

4. Enter the following information on the page:
Enable/Disable: Enabled
Name: IP Camera - Webpage
Private IP: Type in the camera’s IP address , for example: 192.168.0.5
Protocol Type: TCP
Private
Port: 80
Public Port: 80
Schedule: Always
5. Click Apply to save the settings.
6. Enter the following information on the page:
Enable/Disable: Enabled
Name: IP Camera - Webpage
Private IP: Type in the camera’s IP address , for example: 192.168.0.5
Protocol Type: UDP
Private
Port: 9001
Public Port: 9001
Schedule: Always
7. Click Apply o save the settings. IP Camera should now be configured to work
with your router and be accessible from the internet.
DI-704/704P
1. Log into your router
2. On the main page, click on Advanced at the top of the page.
3. On the Virtual Server page, enter the following information;
For ID#1:
Service Port: 80
Service IP: Type in the camera’s IP address , for example: 192.168.0.5
Enabled/Disabled: Enabled
For ID#2
Service Port: 9001
Service IP: Type in the camera’s IP address , for example: 192.168.0.5
Enabled/Disabled: Enabled
4. Save your settings. IP Camera should now be configured to work with your
router and be accessible from the internet.
DI714
1. Log into your router
2. On the main page, click on Advanced at the top of the page.
3. Click on Virtual Server Settings on the left side of the page.
4. Enter the camera’s IP address into the Internal IP field. Under Service, select
IP Camera Manual 51