Security Labs PTZ IP Camera - Method 4: Using IE Browser

All and then click Submit to save your settings. IP Camera should now be
configured to work with your router and be accessible from the internet.
DI-714P+
1. Log into your router
2. On the main page, click on Advanced at the top of the page.
3. On the left side of the page, click Virtual Server.
4. Enter the following information on the page:
For ID#1:
Service Port: 80
Service IP: Type in the camera’s IP address , for example: 192.168.0.5
Enabled/Disabled: Enabled
For ID#2
Service Port: 9001
Service IP: Type in the camera’s IP address , for example: 192.168.0.5
Enabled/Disabled: Enabled
5. Click Apply to save your settings. IP Camera should now be configured to
work with your router and be accessible from the internet.
Dell (http://www.dell.com)
TrueMobile 2300 Wireless Broadband Router
1. Log into your router
2. On the main page, click on Advanced Settings at the top of the page.
3. Go to the Port Forwarding section and select Custom Port
Forwarding Settings.
4. Check the Enable box.
5. Enter the desired name or description in the Service Name field such as
IP Camera Web.
6. In the Incoming Ports field, specify port 80 in both boxes.
7. In the Destination IP Address field, enter the IP address of IP Camera
8. In the Destination MAC Address field, enter the MAC address of IP Camera.
You can find the camera’s MAC address by either looking at the MAC address
sticker on the bottom of the camera or by utilizing IP Camera setup utility to
display the MAC address.
Linksys (http://www.linksys.com)
BEFSR41 – EtherFast Cable/DSL Router
BEFSX41 – Instant Broadband EtherFast Cable/DSL Firewall Router with 4-Port
Switch/VPN EndPoint
BEFW11S4 – Wireless Access Point Router with 4-Port Switch – Version 2
IP Camera Manual 52