20
System Description
Type 024.16.720
6.5.2. Properties of the position controller software
Functions I
•ActivationviaDIPswitches
•Parametersettingviacommunicationssoftware
Additional function Effect
Sealing function
CUTOFF
Valveclosestightoutsidethecontrolrange.Speci-
cation of the value (as %), from which the actuator is
completely deaerated (when 0 %) or aerated (when
100 %)
(see Chapter “8.4. Function of the DIP switches”).
Correction line to adjust the operating
characteristic
CHARACT
Linearization of the process characteristic can be
implemented (see Chapter “8.4. Function of the DIP
switches”).
Effective direction of the controller set-point
value
DIR.CMD
Reversal of the effective direction of the set-point
value
(see Chapter “8.4. Function of the DIP switches”).
Table 2: Functions I