● Use a power supply equipped with a ground fault interrupter. If the power supply
used does not have a ground-fault interrupter, a re could result from a ground
fault.
● This product comes complete with both UK and European mains leads. Only
operate this product with the mains leads supplied or mains leads of the same
type and rating. Using mains leads other than those supplied or mains leads of a
different rating may result in electric shock, short circuit or a re hazzard.
● Do not leave power cables exposed. Exposed cables could trip people and suffer
damage. Electric shocks or short-circuit accidents could result from damaged
cables. Run cables where they will not impede people's movement, or cover
them.
● Always protect any cable that runs across the oor. If the power cable is exposed,
it will be vulnerable to damage and could cause electric shock accidents.
3
Connection of power supply and ground connections
There is an AC bracket at the back of the machine. It has a Mains Switch (ON/OFF), a protection fuse and an inlet
for connecting power cables.
1
Check that the main switch is switched off.
Figure 6.1g
To Next Page