Handling precautions
1
1
When installing and inspecting this product, pay close attention to the following points and handle the machine
accordingly, to allow safe gameplay.
Improper handling, in contravention of the points below or of the precautions stated in this manual, can cause
personal injury and mechanical damage.
● Always turn the power switch off before working on the machine. Electric shocks
or short-circuit accidents could result.
The manual will always state when it is necessary to work on the machine with
the power switched on.
● Do not plug in or unplug the power plug suddenly. Electric shocks or other
accidents could result.
● Do not plug in or unplug the power plug with wet hands. Electric shocks
accidents could result.
● Do not leave power or earth cables exposed in aisles and other areas where
people walk. Exposed cables could be damaged, leading to electric shocks or
short-circuit accidents.
● Do not place objects on top of the power cable, or otherwise damage it. Electric
shocks or res could result.
● Do not pull on the power cable unnecessarily, either during or after installation.
Electric shocks or res could result.
● If the power cable is damaged, order a replacement from the vendor, or from the
ofce stated in this manual. Continued use with a damaged power cable could
cause re, electric shock or ground leakage.
● A ground connection is required. Electric shocks could result without appropriate
grounding.
● Use fuses of the specied rating. Use of a fuse in excess of the specied rating
could result in re or electric shock.
● The IC board and other connectors must be fully connected. If they are not fully
inserted, they could cause electric shocks.
● Never make any changes (additions or alterations) to the specication dened by
the manufacturer.
• Electric shocks or res could result. Such changes could also cause the user
of the product, or others nearby, to feel unwell or suffer accidental injury.
• This company bears absolutely no liability, including for compensation to third
parties, for accidents that occur involving a product that has been altered from
its standard specication.
● Always perform regular servicing (Maintenance and inspection) as specied in
this manual.
● The current capacities for game boards in this product are 3.3V 12A, 5.0V 15A,
12V 10A. Never use game boards which require capacity above these values. Use
of such boards would cause overheating and ignition.
Handling precautions
1