● Only a logic tester should be used for circuit inspection on IC boards.
Note that normal circuit testers cannot be used.
● Use a soft, dry cloth for cleaning the surface of the monitor. Do not
use chemicals such as thinners or benzene.
● Static cha rge fro m th e hu man bod y ca n damag e el ectrica l
components on an IC board. Before starting work on an IC board,
always touch a grounded metal surface, or take other action to
discharge static electricity from your body.
● Some of the components used in this product were not designed
and manufactured specifically for it. The manufacturers of such
components may, for their own reasons, alter the specications of
those components, or cease manufacturing them. In such cases, it
may become impossible to repair or replace them, either during or
after the warranty period.
To Next Page
Loading...
