Sega TARGET BRAVO OPERATION GHOST - ERROR CODES DISPLAY

GAME BOARD
103
16
DISPLAY Error 0001
Keychip Not Found
CAUSE There is no key chip, or the key chip is not connected correctly.
COUNTERMEASURES Check that the key chip is connected correctly.
DISPLAY Error 0002
Keychip Not Available
CAUSE The key chip is not supported. The RINGWIDE system program must be
updated.
COUNTERMEASURES Check how the game was installed.
If that doesn’t x the problem, contact the ofce listed in this manual or the
point of purchase for this product.
DISPLAY Error 0004
Game Program Not Acceptable
CAUSE The key chip is not supported.
COUNTERMEASURES Check that the key chip from a different system is not inserted.
If that doesn’t x the problem, contact the ofce listed in this manual or the
point of purchase for this product.
● If an error code is displayed, get on-site maintenance personnel or other
qualied professional to look at it. An unqualied person attempting to resolve
an error code problem may lead to electric shock, short circuit and risk of re.
If no on-site maintenance personnel or qualied professional is available,
immediately turn off the power and contact the customer services in this
manual or your supplier.
● If a problem not described in this manual occurs or the resolution to a problem
described in this manual is not effective, do not make further attempts to
resolve the problem yourself. Immediately turn off the power and contact the
ofce listed in this manual or your supplier. Any unguided attempts to solve
such problems may lead to a serious accident.
If an error number or message not listed below appears, cease using the product
immediately and contact the ofce listed in this manual or the point of purchase
for this product.
RINGWIDE is equipped to display various errors on-screen to help solve any problems. If an error is displayed the game
cannot be used. Use the following table of causes and countermeasures to solve the problem.
16-4 ERROR CODES DISPLAY