Sega TARGET BRAVO OPERATION GHOST - CONTROLLER AND LED FUSE REPLACEMENT

FUSE REPLACEMENT
17
121
17-1 CONTROLLER AND LED FUSE REPLACEMENT
17 FUSES AND FUSE REPLACEMENT
●
In case fuse replacements other than those stated in this manual are necessary,
contact where you purchased the product from for inquiries regarding this
matter.
● In order to prevent an electric shock, be sure to turn power off and unplug from
the socket outlet before performing work by touching the internal parts of the
product.
● Be careful not to damage the cable. Damaged cables may cause electric
shock or short circuit or present a re risk.
● Be sure to use fuses meeting specied rating. Using fuses exceeding the
specied rating can cause re and electric shock accidents.
● After eliminating the cause of the blowing of fuse, replace the fuse. Depending
on the cause of fuse blowing, continued use with the fuse as is blown can
cause generation of heat and re hazard.
For continued protection against risk of re, replace only with the same type of
fuse having the same electrical ratings.
1
Unlock the side service door to gain access to the fuses.
Side Service Door