Ensure that the casters come
into contact with the oor
before moving.
• When moving the cabinet, do not grip or push the Reector Plates. Doing so
could deform or damage the part.
• If moving through a door or place with a low ceiling such as an elevator, you
should take apart the billboard and Upper Reector plate.
Detailed instructions for removing the Assy Billboard and Reector Plates can be found in Chapter 6 of this manual.
Please follow these instruction in reverse order for removal.
7-1 PRECAUTIONS WHEN MOVING FROM SITE
Remove the Billboard and Reector Plates when
transporting the machine in and out of buildings or
when passing through areas with low ceilings.
To Next Page
Loading...
Need help?
General
