Sega TARGET BRAVO OPERATION GHOST - REPLACING THE SOLENOID

74
CONTROL UNIT
10
1
Refer to 14-2
“
REMOVING THE CONTROLLER SUPPORT” and 14-3 “ REMOVING THE SCOPE” to
take o the controller support and scope body.
2
Refer to Step 2 of 14-4 “REPLACING THE MICROSWICH” and take o the cover L.
3
Disconnect the 1 connector.
CONNECTOR (1)
SM2P
4
Remove the 4 screws and take o the solenoid. Be careful not lose the spring and other small parts.
SCREW (4)
SOLENOID
M4 x 6, w/spring washer
10-5 REPLACING THE SOLENOID