• To avoid injury, be sure to provide sufficient space by considering the
potentially crowded situation at the installation location. Insufcient installation
space can cause contact, collisions, and/or trouble between customers.
• During daily cleaning, be sure to check the surface of the control unit and
other parts that the player touches with his/her hands for damage, cracks, or
loose screws. If a player uses the machine while it is damaged, cracked, or
has a loose screw, the player may become injured.
• Check carefully to make sure there are no gaps in the cabinet joints and that
they are not loose. If there are gaps or looseness, players may get their hands
or ngers caught, resulting in an injury.
• Make sure all the doors are locked securely and they do not rattle. If the doors
are not locked properly or there are gaps or rattling, players could get their
ngers or hands caught.
• Be sure to perform appropriate adjustment of the LCD. For operation of this
machine, do not leave monitor’s ickering or deviation as is. Failure to observe
this can have a bad influence upon the players’ or customers’ physical
conditions.
• Inspect for the following items during a trial run. If there is any type of error, use
the Test Mode, etc. to resolve the problem. If you continue use with an error, it
can cause an accident or irreparable parts damage:
- Is there any strangeness in the operability of the control unit?
- Is there any improper adjustment of the LCD screen?
• Prepare a place where players can rest if they feel sick.
Ensure that the buttons (in 3 places) are functioning correctly.
Ensure that there is no damage to cable connectors.
Ensure that the screws are not loose and are all present.
To Next Page
Loading...
Need help?
General
